1
00:00:00,490 --> 00:00:08,380
Hello again, before we jump into Heidi, I would like to share with you some other do's commonly used

2
00:00:08,770 --> 00:00:10,240
in reverse engineering.

3
00:00:11,200 --> 00:00:13,120
So the first cease fire.

4
00:00:13,840 --> 00:00:20,730
So now we're in this photo here, so I'm going to have a list to list the contents of the first command

5
00:00:20,820 --> 00:00:21,190
I use.

6
00:00:21,190 --> 00:00:27,190
His fire and fire is used to determine the type of particular fire.

7
00:00:27,640 --> 00:00:33,520
So to use it, you take the command file, followed by the name of the father and you like to analyze

8
00:00:33,820 --> 00:00:34,690
and hit enter.

9
00:00:35,320 --> 00:00:42,400
And then you would tell you whatever it is in this case, you can see it is a 64 bit executable alpha,

10
00:00:42,400 --> 00:00:51,040
which is in binary file executable for Linux, the second command, which we commonly use his strength

11
00:00:51,040 --> 00:00:51,480
command.

12
00:00:52,240 --> 00:00:57,960
So the strength command is used to list all the strings contained within the file.

13
00:00:58,390 --> 00:01:04,690
So to use it, we take the strength command, followed by the name of the fiscella and hit Enter and

14
00:01:04,690 --> 00:01:08,250
you list all the strings that are found within this file.

15
00:01:08,740 --> 00:01:17,380
Sometimes the strings commands, so can list all the key, all the passports and all the keys, even

16
00:01:17,380 --> 00:01:19,120
the flag that you are trying to capture.

17
00:01:19,270 --> 00:01:20,300
You can see it from here.

18
00:01:20,890 --> 00:01:25,370
So that is how Strings Command is so useful sometimes.

19
00:01:25,990 --> 00:01:34,240
And the third command, let me clear the screen first that we normally use is the Hex editor so we can

20
00:01:34,240 --> 00:01:36,640
open the S1 file with the Hex editor.

21
00:01:37,030 --> 00:01:45,640
So the editor for Linux is accessing these and then you open the file in case I tell you to X1.

22
00:01:45,970 --> 00:01:50,930
Then you hit enter and you open the file and show it to you in a Hex editor.

23
00:01:50,950 --> 00:01:52,240
So this is a Hex editor.

24
00:01:53,180 --> 00:02:02,500
He shows you the entire path in two views on the right is your ASCII representation, the text representation

25
00:02:02,500 --> 00:02:04,340
of all the bytes inside the file.

26
00:02:04,900 --> 00:02:11,890
So as you can see here on the left, you have seven F in hexadecimal, which refers to E.

27
00:02:13,500 --> 00:02:22,560
And then next one is for fire, the house for fire refers to hell, followed by the Hecks falsey, which

28
00:02:22,560 --> 00:02:23,610
refers to F.

29
00:02:24,660 --> 00:02:31,860
So this is useful because you can use this to look into the fire cell to see what is contained in the

30
00:02:31,860 --> 00:02:32,220
fire.

31
00:02:33,270 --> 00:02:39,740
So EAF is the header for Linux executable files you see in here in Afghanistan.

32
00:02:40,260 --> 00:02:43,830
Then you know that this is a Linux executable file.

33
00:02:45,150 --> 00:02:50,760
And you scroll down, you can see other things are the strings within it, like, for example, libraries

34
00:02:50,970 --> 00:02:55,820
and very excited and some functions as well can be seen here.

35
00:02:57,480 --> 00:03:01,830
So and here probably is your quote, your instructions.

36
00:03:03,220 --> 00:03:07,210
But to view your instructions like this is quite confusing.

37
00:03:08,910 --> 00:03:16,680
So normally we will use either this assembler so that either can interpret how this hexadecimal code

38
00:03:17,160 --> 00:03:20,600
shinkle into assembly language, easier to view.

39
00:03:21,600 --> 00:03:30,850
So this is how we can use some of the common tools in finding Linux for doing initial analysis.

40
00:03:31,320 --> 00:03:36,160
So in the next lesson, we are going to start off with IDL.

41
00:03:36,660 --> 00:03:38,520
So thank you for watching.

42
00:03:39,660 --> 00:03:40,670
See you in the next one.
